QJ140/QJ160/ QJ200
Hydraulic Angle Cutting Machine
Applicable industry：
Used for cutting corner of angles and also used for punching & marking by installing of mould.
Product feature
■The machine with opening C-type structure, its cutting mould is rectangular double-blade mode. Multi-directions rotational corner cutting mould can cut out different angle of angles only need to adjust rotation die-carrier so as not to rotate the angles, so corner cutting with little error only need small working area.
■The machine can be installed marking & punching system by customers’ request, that is, only need to exchange moulds so as to carry out marking or punching of angles.
■The machine with light adjuster makes corner cutting of angles accurately and easy to use it.
Product Basic Parameter
|
Model |
QJ140 |
QJ160 |
QJ200 |
|
Functions |
Used for cutting corner of angles in steel tower industry, and also used for marking & punching if replace mould |
|
Nominal pressure(KN) |
800 |
1000 |
1600 |
|
Stroke of oil cylinder(mm) |
50 |
50 |
50 |
|
Times of stroke(min-1) |
20～25 |
20～25 |
15～20 |
|
Power of motor(kw) |
15 |
15 |
22 |
|
Scope of angles(mm) |
L40×40×3～
L140×140×12 |
L40×40×3～
L160×160×16 |
L40×40×3～
L200×200×20 |
|
Rotary angles of corner cutting mould |
360°manual or Mechanical |
|
Overall dimensions of corner cutting mould(mm) |
650×650×500 |
700×700×500 |
830×700×600 |
|
Overall dimensions
L×W×H(mm) |
1270×1020×1800 |
1300×1020×1880 |
1370×1120×1900 | |
